Nonlinear self-flipping of polarization states in asymmetric waveguides

Waveguides of subwavelength dimensions with asymmetric geometries, such as rib waveguides, can display nonlinear polarization effects in which the nonlinear phase difference dominates the linear contribution, provided the birefringence is sufficiently small. We demonstrate that self-flipping polarization states can appear in such rib waveguides at low (mW) power levels. We describe an optical power limiting device with optimized rib waveguide parameters that can operate at low powers with switching properties

Predicting the whispering gallery mode spectra of microresonators

The whispering gallery modes (WGMs) of optical resonators have prompted intensive research efforts due to their usefulness in the field of biological sensing, and their employment in nonlinear optics. While much information is available in the literature on numerical modeling of WGMs in microspheres, it remains a challenging task to be able to predict the emitted spectra of spherical microresonators. Here, we establish a customizable Finite- Difference Time-Domain (FDTD)-based approach to investigate the WGM spectrum of microspheres. The simulations are carried out in the vicinity of a dipole source rather than a typical plane-wave beam excitation, thus providing an effective analogue of the fluorescent dye or nanoparticle coatings used in experiment. The analysis of a single dipole source at different positions on the surface or inside a microsphere, serves to assess the relative efficiency of nearby radiating TE and TM modes, characterizing the profile of the spectrum. By varying the number, positions and alignments of the dipole sources, different excitation scenarios can be compared to analytic models, and to experimental results. The energy flux is collected via a nearby disk-shaped region. The resultant spectral profile shows a dependence on the configuration of the dipole sources. The power outcoupling can then be optimized for specific modes and wavelength regions. The development of such a computational tool can aid the preparation of optical sensors prior to fabrication, by preselecting desired the optical properties of the resonator.Comment: Approved version for SPIE Photonics West, LASE, Laser Resonators, Microresonators and Beam Control XV

Method for predicting whispering gallery mode spectra of spherical microresonators

A full three-dimensional Finite-Difference Time-Domain (FDTD)-based toolkit is developed to simulate the whispering gallery modes of a microsphere in the vicinity of a dipole source. This provides a guide for experiments that rely on efficient coupling to the modes of microspheres. The resultant spectra are compared to those of analytic models used in the field. In contrast to the analytic models, the FDTD method is able to collect flux from a variety of possible collection regions, such as a disk-shaped region. The customizability of the technique allows one to consider a variety of mode excitation scenarios, which are particularly useful for investigating novel properties of optical resonators, and are valuable in assessing the viability of a resonator for biosensing.Comment: Published 10 Apr 2015 in Opt. Express Vol. 23, Issue 8, pp. 9924-9937; The FDTD toolkit supercomputer scripts are hosted at: http://sourceforge.net/projects/npps/files/FDTD_WGM_Simulator

Index matching between passive and active tellurite glasses for use in microstructured fiber lasers: Erbium doped lanthanum-tellurite glass

Active and passive variants of La-containing tellurite glasses have been developed with matched refractive indices. The consequences of adding lanthanum to the glass was studied through measurements of the crystallization stability, glass viscosity and the loss of unstructured fibers. Doping the glass with erbium allowed for any spectroscopic changes to be observed through measurements of the absorption and energy level lifetimes. The fluorescence emission spectra were measured at 1.5 microm and, to the best of our knowledge, for the first time in tellurite glass at 2.7 microm.Michael R. Oermann, Heike Ebendorff-Heidepriem, Yahua Li, Tze-Cheung Foo, and Tanya M. Monrohttp://www.opticsinfobase.org/abstract.cfm?URI=oe-17-18-1557

Driving down the Detection Limit in Microstructured Fiber-Based Chemical Dip Sensors

We present improvements to fluorescence sensing in soft-glass microstructured optical fibers that result in significantly improved sensitivity relative to previously published results. Concentrations of CdSe quantum dots down to 10 pM levels have been demonstrated. We show that the primary limitation to the sensitivity of these systems is the intrinsic fluorescence of the glass itself

Direct probing of evanescent field for characterization of porous terahertz fibers

We develop a technique based on a micromachined photoconductive probe-tip to characterize a terahertz (THz) porous fiber. Losses less than 0.08 cm-1 are measured in the frequency range from 0.2 to 0.35 THz, with the minimum of 0.003 cm-1 at 0.24 THz. Normalized group velocity greater than 0.8, which corresponds to dispersion values in between -1.3 and -0.5 ps/m/μm for 0.2<f<0.35 THz are obtained. Moreover, we directly measure the evanescent electric field as a function of frequency. Good agreement between the measured curves and expected theoretical values indicates the low invasiveness of the applied probe-tip. © 2011 American Institute of Physics.Shaghik Atakaramians, Shahraam Afshar V., Michael Nagel, Henrik K. Rasmussen, Ole Bang, Tanya M. Monro, and Derek Abbot

Nanodiamond in tellurite glass Part I: origin of loss in nanodiamond-doped glass

Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the embedded nanodiamond on the loss of the glasses. The glass fabrication conditions such as melting temperature and concentration of NDs added to the melt were found to have critical influence on the interaction. Based on this understanding, we identified promising fabrication conditions for decreasing the loss to levels required for practical applications.Comment: 13 pages, 6 figure